{"product_id":"precision-raceworks-in-tank-fuel-filter-regulator-v2-e9x-e8x","title":"Precision Raceworks In-Tank Fuel Filter \u0026 Regulator (V2) - E9x\/E8x","description":"\u003cp\u003eThe Precision Raceworks In-Tank Fuel Filter \u0026amp; Regulator (V2) replaces the OEM plastic fuel filter\/regulator assembly in E9x and E8x BMW chassis with an all-billet housing built for higher flow, lower current draw on the factory EKP pump controller, and compatibility with pump gas through race fuel.\u003c\/p\u003e\n\u003cp\u003eThe stock filter\/regulator assembly is one of the largest flow restrictions in the E9x\/E8x fuel system. Per Precision Raceworks' own flow-bench testing, the V2 unit delivers up to 37% more flow at 72 psi than a new OEM unit on a single-pump setup, and up to 43% more flow on dual-pump setups, while also reducing current draw on the factory pump controller.\u003c\/p\u003e\n\u003ch3\u003eRegulator Options\u003c\/h3\u003e\n\u003cp\u003eFour regulator configurations are available on this listing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Tank 5 Bar\u003c\/strong\u003e - a preset 5 bar, 1:1 boost-referenced regulator that stays in the tank for a factory-style install with no external lines to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Regulator (Supply Your Own)\u003c\/strong\u003e - swaps the in-tank regulator for a return port (AN6 ORB) so you can run your own regulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro 5 Bar Static\u003c\/strong\u003e - a static regulator that threads directly into a port-injection fuel rail, with the return line and fittings included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 1-to-1\u003c\/strong\u003e - an engine-bay-mounted, fully adjustable 1:1 boost-referenced regulator for race applications; it has no check valve, so fuel pressure bleeds off when the engine is shut off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-billet aluminum housing, no plastic components\u003c\/li\u003e\n\u003cli\u003eOversized in-tank supply line and inlet connection\u003c\/li\u003e\n\u003cli\u003eReplaceable 10-micron microglass filter element, made in the USA\u003c\/li\u003e\n\u003cli\u003eConnects to the factory AN6 ORB fitting and works with any fuel pump, including the stock unit, or a Precision Raceworks Bucketed Performance Fuel Pump\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same process as replacing the factory filter\/regulator assembly: the float arm and venturi jet transfer over from the OEM unit, and the wiring uses simple barrel-connector splices. This is not a beginner-friendly install — if you're not comfortable working inside a fuel tank, have it installed by a shop familiar with E9x\/E8x fuel systems. Official installation instructions are available from Precision Raceworks.\u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIn-Tank 5 Bar - SKU P07W 601-0244, MPN 601-0244\u003c\/li\u003e\n\u003cli\u003eNo Regulator (Supply Your Own) - SKU P07W 601-0275, MPN 601-0275\u003c\/li\u003e\n\u003cli\u003eMicro 5 Bar Static - SKU P07W 622-0273, MPN 622-0273\u003c\/li\u003e\n\u003cli\u003eAdjustable 1-to-1 - SKU P07W 622-0272, MPN 622-0272\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include a fuel pump?\u003c\/strong\u003e\u003cbr\u003eNo. This is a filter and regulator assembly only; it works with the factory pump or any aftermarket in-tank pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich regulator option should I choose?\u003c\/strong\u003e\u003cbr\u003eThe In-Tank 5 Bar option is the closest to a factory-style install. The Micro 5 Bar Static and Adjustable 1-to-1 options move the regulator to the engine bay for more flow and pressure stability, with the Adjustable 1-to-1 aimed at race setups. Contact your BMP Tuning rep if you're not sure which fits your build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit factory fuel lines?\u003c\/strong\u003e\u003cbr\u003eYes, the standard configuration connects to the stock fuel line fittings. Upgraded fuel lines are recommended for maximum flow but not required for install.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eE90\u003c\/li\u003e\n\u003cli\u003eE91\u003c\/li\u003e\n\u003cli\u003eE92\u003c\/li\u003e\n\u003cli\u003eE93\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Precision Raceworks","offers":[{"title":"Default Title","offer_id":43595783012400,"sku":"P07W 601-0244","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/4573\/7776\/files\/V2Regulator1-1.jpg?v=1788952510","url":"https:\/\/3pedalsbetter.com\/products\/precision-raceworks-in-tank-fuel-filter-regulator-v2-e9x-e8x","provider":"3Pedals Better","version":"1.0","type":"link"}