{"product_id":"precision-raceworks-port-injection-kit-bmw-s58-g80-m3-g82-g83-m4","title":"Precision Raceworks Port Injection Kit - BMW S58 (G80 M3 \u0026 G82\/G83 M4)","description":"\u003cp\u003eThe Precision Raceworks S58 Port Injection Kit adds supplemental fueling to the S58 engine without requiring an expensive custom manifold. It bolts up to the stock manifold and integrates like a factory system, giving G80 M3 and G82\/G83 M4 owners a straightforward path to more fuel for bigger turbo builds.\u003c\/p\u003e\n\u003cp\u003eThe fuel rail runs AN6 bore all the way through, unlike some competing kits that neck down to a smaller internal diameter at the connection and lose flow under load. The rail also uses locks that secure each injector in place, removing the 72+ psi of upward force that would otherwise push against the screws holding the rail to the plastic intake manifold, and letting the rail come off for service without fuel going everywhere. Lines are smooth bore PTFE with stainless and nylon braid, and every fitting is billet.\u003c\/p\u003e\n\u003cp\u003eInjectors are genuine Bosch Motorsport units, modified and flow matched both statically and dynamically, with a certificate of conformance included for every set.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Controller\u003c\/h3\u003e\n\u003cp\u003eThis kit is a fuel rail and injector system only; it needs a controller to fire the injectors. Precision Raceworks builds two of them: the Motiv Re|Flex Lite for straightforward sequential control, and the Motiv Re|Flex+ for CANbus integration with supported flash platforms plus additional sensor inputs and outputs. Not sure which one fits your setup? Contact your BMP Tuning rep.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStock manifold compatible, no custom manifold required\u003c\/li\u003e\n\u003cli\u003e100% E85 compatible\u003c\/li\u003e\n\u003cli\u003eAN6 bore fuel rail, full diameter from connection to injector\u003c\/li\u003e\n\u003cli\u003eInjector locks remove upward pressure on the intake manifold\u003c\/li\u003e\n\u003cli\u003eSmooth bore PTFE fuel lines with stainless and nylon braid\u003c\/li\u003e\n\u003cli\u003eBillet AN6 ORB female fuel rail connection\u003c\/li\u003e\n\u003cli\u003eInjectors flow matched to 2% or better\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAN6 billet fuel rail\u003c\/li\u003e\n\u003cli\u003eSmooth bore PTFE fuel lines and billet fittings\u003c\/li\u003e\n\u003cli\u003eBosch Motorsport injectors (750cc or 950cc, where selected)\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eCertificate of conformance with flow data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eInstallation is engine bay-level work best handled by an experienced installer, and the kit requires a supporting tune and a compatible injector controller before the car is driven.\u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 3.5 lbs\u003c\/li\u003e\n\u003cli\u003eInjector connector: EV6 (US Car Connector), compatible with Re|Flex, AIC, and JB4 controllers\u003c\/li\u003e\n\u003cli\u003eFuel rail connection: AN6 ORB Female\u003c\/li\u003e\n\u003cli\u003e750cc: 750cc @ 43.5 psi, 1,050cc @ 72.5 psi\u003c\/li\u003e\n\u003cli\u003e950cc: 950cc @ 43.5 psi, 1,226cc @ 72.5 psi\u003c\/li\u003e\n\u003cli\u003e750cc \/ Black: SKU P07W 601-0270, MPN 601-0270\u003c\/li\u003e\n\u003cli\u003e750cc \/ Blue: SKU P07W 601-0271, MPN 601-0271\u003c\/li\u003e\n\u003cli\u003e750cc \/ Silver: SKU P07W 601-0276, MPN 601-0276\u003c\/li\u003e\n\u003cli\u003e950cc \/ Black: SKU P07W 601-0272, MPN 601-0272\u003c\/li\u003e\n\u003cli\u003e950cc \/ Blue: SKU P07W 601-0273, MPN 601-0273\u003c\/li\u003e\n\u003cli\u003e950cc \/ Silver: SKU P07W 601-0277, MPN 601-0277\u003c\/li\u003e\n\u003cli\u003eNo Injectors \/ Black: SKU P07W 601-0278, MPN 601-0278\u003c\/li\u003e\n\u003cli\u003eNo Injectors \/ Blue: SKU P07W 601-0279, MPN 601-0279\u003c\/li\u003e\n\u003cli\u003eNo Injectors \/ Silver: SKU P07W 601-0280, MPN 601-0280\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this kit include a controller for the injectors?\u003c\/strong\u003e\u003cbr\u003eNo. The kit is the fuel rail and injectors; you'll need a compatible controller such as the Motiv Re|Flex Lite or Re|Flex+ to fire the added injectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the 750cc and 950cc injector options?\u003c\/strong\u003e\u003cbr\u003eThe 950cc injectors flow more fuel at a given pressure, so they support a higher supplemental fueling ceiling for bigger turbo builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy the rail without injectors?\u003c\/strong\u003e\u003cbr\u003eYes, a No Injectors option is available for customers who already have compatible injectors on hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHave a fitment or setup question before you order?\u003c\/strong\u003e\u003cbr\u003eContact your BMP Tuning rep.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%;\"\u003e\u003c\/div\u003e","brand":"Precision Raceworks","offers":[{"title":"Default Title","offer_id":43595884789808,"sku":"P07W 601-0270","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/4573\/7776\/files\/S58FuelRail-12_a2319be7-4b4e-45f5-bb1d-8df73bdfb2b8.jpg?v=1788953166","url":"https:\/\/3pedalsbetter.com\/products\/precision-raceworks-port-injection-kit-bmw-s58-g80-m3-g82-g83-m4","provider":"3Pedals Better","version":"1.0","type":"link"}