Precision Raceworks Port Injection Kit - VW & Audi 2.0T EA888.3 (MQB)

The Precision Raceworks Port Injection Kit adds a genuine Bosch Motorsport multi-port injection system to the factory MQB EA888.3 2.0T intake manifold, giving upgraded turbo setups the extra fuel volume they need to run safely on pump gas or full E85. Factory ECU control is retained through a direct pin-in wiring harness, so the kit integrates like it left the factory that way.

Choose 925cc injectors for builds up to roughly 550 whp, or step up to 1300cc injectors for setups pushing toward 1,000 whp. Every injector ships flow matched with its own certificate of conformance.

Important Compatibility Information

This kit is built for the VW/Audi MQB EA888.3 2.0T platform. BMW S58 owners should use the Precision Raceworks Port Injection Kit - BMW S58 instead.

Features

• 925cc injectors support up to 550 whp; 1300cc injectors support up to 1,000 whp
• 100% E85 compatible
• Genuine Bosch Motorsport injectors, flow matched and individually serialized
• Billet Precision Raceworks fuel rail
• Direct pin-in wiring harness for factory ECU control

What's Included

• Billet fuel rail assembly
• Bosch Motorsport injectors (925cc or 1300cc)
• Wiring harness with flex fuel provision
• Certificate of conformance with flow data

Note: reading live ethanol content through the included harness needs a separate flex fuel sensor; the Precision Raceworks PTFE Flex Fuel Upgrade supplies the sensor fitting for this platform.

Installation Notes

The kit integrates with the factory intake manifold and connects into the factory injector and ECU wiring. This is an engine bay-level install best handled by an experienced installer or a shop familiar with MQB port injection setups, and it requires a supporting tune before the car is driven.

Product Specifications

• Platform: VW/Audi MQB EA888.3 2.0T
• Injector connector: EV1
• E85 compatible: Yes
• 925cc / Blue: SKU P07W 601-0009, MPN 601-0009
• 925cc / Black: SKU P07W 601-0178, MPN 601-0178
• 1300cc / Blue: SKU P07W 601-0010, MPN 601-0010
• 1300cc / Black: SKU P07W 601-0179, MPN 601-0179

Frequently Asked Questions

Do I need a tune to run this kit?
Yes. Port injection changes the fueling strategy, so a supporting tune from a compatible platform is required before driving on the kit.

What's the difference between the 925cc and 1300cc injectors?
The 925cc injectors support builds up to roughly 550 whp, while the 1300cc injectors are rated for builds approaching 1,000 whp.

Does this kit require E85, or does it work on pump gas too?
Both. The kit is fully E85 compatible but does not require running ethanol blends to function.

Still not sure which injector size fits your build?
Reach out to your BMP Tuning rep for guidance.